
Rear-loading refuse compactor bodies built in-house from 7 to 32 cubic yards, fabricated at our Riyadh plant and mounted on the chassis you choose, fully hydraulic via PTO.
Technical specsA vacuum tank fabricated at our Riyadh plant and mounted on the chassis you choose — for sewage, sludge, septic tanks and holding pits, with a vacuum pump, quick-connect suction couplings and hydraulic discharge pump.

A vacuum unit is judged on two things only: how many minutes it needs to empty a pit, and how many times it stops during the month. An undersized pump saves on the invoice and costs you on the route, and a tank not calculated for negative pressure dents inward within months, not years.
We fabricate vacuum tanks at our Riyadh plant in sizes set by your actual work: steel plate of a thickness calculated for vacuum service, external reinforcing rings, internal baffles that stop the liquid surging under braking, a full rear door with quick-locking and chemical-resistant sealing, and a safety trap that keeps liquid out of the pump. The pump is mounted and driven by a PTO from the vehicle gearbox, with a fill indicator, relief valve and pressure gauge.
We fit suction hoses in the diameters you need, a hose reel, quick couplings and side storage lockers, then pressure-test the tank and check every joint for tightness before final paint. Handover includes the truck painted and tested with its operating manual and a 12-month warranty — and we can supply the chassis and the body together or fit the body to your own truck.
| Type | Truck-mounted vacuum tank |
|---|---|
| Sizes | All sizes — set by the nature of the work |
| Tank | Plate calculated for vacuum service with reinforcing rings |
| Baffles | Internal, to stop liquid surge under braking |
| Pump | Vacuum pump driven by PTO from the vehicle gearbox |
| Rear door | Full door, quick-locking, chemical-resistant seal |
| Safety | Safety trap, relief valve, pressure gauge, fill indicator |
| Accessories | Suitable pump for the size of the tank + suction hoses, hose reel, quick couplings, side lockers |
| Handover | Painted and tested, with manual and 12-month warranty |
| Painting | Internal Epoxy Paint |






We have a page for each region explaining what suits its conditions and buyers:

Rear-loading refuse compactor bodies built in-house from 7 to 32 cubic yards, fabricated at our Riyadh plant and mounted on the chassis you choose, fully hydraulic via PTO.
Technical specs
ÜSTÜN-EL road sweepers from Türkiye, truck-mounted with a 2 to 12 m³ hopper (6 to 8 m³ the most requested), a four-cylinder PERKINS auxiliary diesel engine, fully hydraulic drive, adjustable brush speed and a sweeping width up to 2400 mm.
Technical specs
A truck-mounted airport runway sweeper fitted with a GQ-MB01 magnet bar that collects nails and metal fragments the brush cannot lift — direct protection for aircraft tyres and engines against foreign object damage (FOD).
Technical specs
Paying cable out incorrectly damages it before energisation. A purpose-built trailer saves time and prevents inspection rejection.
Read article
Net payload, wheelbase, axle load distribution and PTO — four numbers that decide whether a build-up succeeds.
Read article
How to size a compactor for a cleaning contract, and which clauses decide its real service life in Saudi conditions.
Read articleSend us the specification or tender document — our engineers will review it and return a compliant technical and commercial offer within one working day.
Authorised agents for leading global manufacturers