
Rear-loading refuse compactor bodies built in-house from 7 to 32 cubic yards, fabricated at our Riyadh plant and mounted on the chassis you choose, fully hydraulic via PTO.
Technical specsJeddah is the largest urban centre on the western coast, and its municipality operates through sixteen sub-municipalities. That structure means multiple cleaning contracts and very different collection routes — each needing equipment matched to it.

Historic Jeddah and the older districts have narrow streets where a large compactor blocks traffic and wastes time manoeuvring. The newer northern developments along Obhur have long distances and widely spaced collection points, calling for greater capacity and fewer trips.
So we start from the route, not the machine: how many collection points, the average distance between them, and where the nearest landfill is. Those figures determine capacity, compaction ratio and chassis.
Jeddah is coastal, and the air carries moisture and salt year-round. That shortens the life of any untreated steel structure, showing first in the compactor floor where leachate collects, and at hydraulic connections and weld lines.
Five machines covering the full cleaning cycle, all built or outfitted at our Riyadh plant on the chassis you choose: rear-loading refuse compactor, suction road sweeper, water tanker, skip loader and hook lift.
Most cleaning equipment in Jeddah is bought through a tender or a cleaning contract rather than direct purchase. Send us the tender document and we prepare a clause-by-clause compliant offer with the statutory documents and local-content certificate.
The plant is in Riyadh with a direct route to Jeddah. You own the unit outright with a tax invoice and a 12-month warranty on fabrication and installation, with hydraulic spares from our global agencies and technical support covering the Makkah Region within our 25-city service network.
Each machine below is built or outfitted at our Riyadh plant and delivered to Jeddah with outright ownership, a tax invoice and a 12-month warranty.

Rear-loading refuse compactor bodies built in-house from 7 to 32 cubic yards, fabricated at our Riyadh plant and mounted on the chassis you choose, fully hydraulic via PTO.
Technical specs
ÜSTÜN-EL road sweepers from Türkiye, truck-mounted with a 2 to 12 m³ hopper (6 to 8 m³ the most requested), a four-cylinder PERKINS auxiliary diesel engine, fully hydraulic drive, adjustable brush speed and a sweeping width up to 2400 mm.
Technical specs
Water tankers in all sizes, fabricated at our Riyadh plant on a truck chassis or as a semi-trailer, with internal baffles, a discharge pump, hose reel and a leak test before handover.
Technical specs
A vacuum tank fabricated at our Riyadh plant and mounted on the chassis you choose — for sewage, sludge, septic tanks and holding pits, with a vacuum pump, quick-connect suction couplings and hydraulic discharge pump.
Technical specs
Load lugger (skip loader) container handlers built at our Riyadh plant in 12 and 16 tonne capacities, with two synchronised hydraulic arms, hydraulic tipping discharge, securing chains and safety locks.
Technical specs
Hook lift (roll on-off) container handling systems from 20 to 26 tonnes, Italian-built or fabricated in-house, mounted on the chassis with hydraulic operation via PTO and in-cab or remote control.
Technical specsSend us the specification, the tender document, or simply a description of what you need. We will prepare a compliant offer and help you choose the right capacity and chassis first.
Authorised agents for leading global manufacturers