Italian-built platform insulated to 46,000 V with up to 19 m working height and 13 m outreach, compliant with ANSI A92.2 CAT C as requested by the Saudi Energy Company.
A GQ-branded non-insulated aerial work platform manufactured in Türkiye, 20 m working height, articulated boom, four outriggers and a hydraulically levelled basket — mounted on a medium truck at our Riyadh plant for general work at height away from live conductors.
A GQ-branded non-insulated straight telescopic boom platform manufactured in Türkiye — the highest direct height and better stability at long reach, with a tilting basket and four hydraulic outriggers.
HC hydraulic knuckle boom cranes from Italy, from 3 to 15 tonnes, mounted behind the cab or rear-mounted, with cargo body fabrication and PTO installation at our Riyadh plant.
GQ-branded telescopic cranes manufactured in Korea with a multi-stage straight boom, mounted behind the cab at our Riyadh plant with a steel cargo body, hydraulic outriggers and a PTO driven from the vehicle gearbox.
A Ferrari fibreglass man basket from Italy: 250 kg capacity, self-levelling, insulated to 1000 V with an internal hook — quick-mounted at the boom head to turn the crane into a safe personnel-lifting unit.
Rear-loading refuse compactor bodies built in-house from 7 to 32 cubic yards, fabricated at our Riyadh plant and mounted on the chassis you choose, fully hydraulic via PTO.
ÜSTÜN-EL road sweepers from Türkiye, truck-mounted with a 2 to 12 m³ hopper (6 to 8 m³ the most requested), a four-cylinder PERKINS auxiliary diesel engine, fully hydraulic drive, adjustable brush speed and a sweeping width up to 2400 mm.
A truck-mounted airport runway sweeper fitted with a GQ-MB01 magnet bar that collects nails and metal fragments the brush cannot lift — direct protection for aircraft tyres and engines against foreign object damage (FOD).
Water tankers in all sizes, fabricated at our Riyadh plant on a truck chassis or as a semi-trailer, with internal baffles, a discharge pump, hose reel and a leak test before handover.
A vacuum tank fabricated at our Riyadh plant and mounted on the chassis you choose — for sewage, sludge, septic tanks and holding pits, with a vacuum pump, quick-connect suction couplings and hydraulic discharge pump.
A street washing and spraying tanker built at our Riyadh plant: a water tank in the size you need, a pressure pump, adjustable front and side spray bars, plus a roof-mounted water cannon and a hand lance for kerbs and underpasses.
Load lugger (skip loader) container handlers built at our Riyadh plant in 12 and 16 tonne capacities, with two synchronised hydraulic arms, hydraulic tipping discharge, securing chains and safety locks.
Hook lift (roll on-off) container handling systems from 20 to 26 tonnes, Italian-built or fabricated in-house, mounted on the chassis with hydraulic operation via PTO and in-cab or remote control.
Steel cargo bodies fabricated entirely in-house with drop sides, a sub-frame, regulation bumpers and paint in your livery, with payload and axle loads calculated before fabrication starts.
A purpose-built trailer that lifts the cable drum itself, hauls it, and controls pay-out speed during installation, with an independent hydraulic unit that works behind a pickup or truck.
A three-axle semi-trailer fabricated entirely in-house with mesh or steel sides and a rear knuckle crane, so it loads and unloads itself without a machine on site.
A recovery truck whose deck lowers fully to the ground (full down) — a low loading angle that takes sports cars, low-clearance vehicles and completely disabled units without lifting them. Built end to end at our Riyadh plant on the chassis you choose.
Hydraulic lowbed trailers for heavy machinery haulage, with varying axle counts and hydraulic suspension that adjusts deck height and controls load distribution.
Aluminium tankers for petroleum products and industrial liquids: a much lower tare weight than steel means higher net payload and lower fuel burn on every trip.
Interpump hydraulic pumps from Italy in all sizes, Bezares power take-offs from Spain, plus valves, cylinders, power packs and high-pressure hoses — supplied immediately from our Riyadh stock.
SOFAMEL electrical safety and protective equipment from Spain: insulating gloves, harnesses and height equipment, insulating mats, blankets and dielectric boots, insulated operating and switching poles, earthing and short-circuiting kits for LV, MV and HV, voltage detectors, fiberglass ladders, and warning signs and work-area delimitation.
SOFAMEL cable connectors and lugs from Spain: copper, aluminium and bimetallic, compression and mechanical clamps, setscrew and split-bolt connectors, battery terminals, insulated and cord-end terminals, heat shrinks, piercing connectors for aerial networks, and connectors for photovoltaic cables.
SOFAMEL electrical tools from Spain: crimping tools for insulated and non-insulated terminals and ferrules, cable cutters, stripping tools, manual and electro-hydraulic tools, battery-powered crimpers, hydraulic heads and pumps — plus a full 1000 V insulated hand-tool range.
